Knowledge Forum

MGO cement’s unique characteristics make it inherently suited for prefabricated construction, solving critical challenges faced by contractors, architects, and developers worldwide.

1. Lightweight Yet Ultra-Strong

• Density ranges from 1.6–1.8 g/cm³, 30–40% lighter than traditional concrete, reducing transportation and assembly costs.
• 28-day compressive strength reaches up to 110 MPa, with flexural strength of 20 MPa—outperforming Portland cement and gypsum board.
• Ideal for prefabricated panels and modules, as its strength supports structural loads while minimizing weight for easy on-site assembly.

2. Fire Resistance & Safety (ASTM E136 Certified)

• Achieves A1-class non-combustible rating, with a fire resistance limit of up to 4 hours—critical for prefabricated buildings’ safety compliance.
• Releases no toxic fumes or harmful gases during combustion, meeting global safety standards for residential, commercial, and public buildings.
• Widely used in fire-rated partitions, floor slabs, and fire doors for prefabricated projects (trusted by over 300 fire door manufacturers in Hong Kong alone).

3. Eco-Friendly & Low-Carbon

• Production energy consumption is 30% lower than traditional cement, cutting carbon emissions significantly.
• Contains no formaldehyde, VOCs, or harmful additives—aligning with LEED, BREEAM, and other global green building certifications.
• Enables carbon reduction in prefabricated projects (e.g., Chongqing No.13 People’s Hospital project achieved 3.3% carbon emission reduction).

4. Water Resistance & Durability

• Low water absorption (<5%), maintaining structural integrity even in humid environments (bathrooms, basements, coastal areas).
• Resists corrosion, mold, and termite infestation, with a service life of over 50 years—twice that of gypsum board.

• Performs well in wet-dry cycle tests, with mass loss rate as low as 3.2%, making it suitable for prefabricated buildings in harsh climates.

• Top Applications of MGO Cement in Prefabricated Construction

• MGO cement’s adaptability makes it a versatile solution for various prefabricated building components, streamlining construction and enhancing performance.

• 1. Prefabricated Wall & Floor Panels

• Integrates insulation, soundproofing, and fire resistance in one component—eliminating the need for multiple materials.
• Lightweight panels enable fast assembly: a prefabricated villa can be fully installed in 1–2 days, saving 60% labor compared to traditional construction.
• Example: Australian steel-structured villas use 9mm-thick MGO cement panels that withstand forklift loads, replacing heavy concrete slabs.

• 2. Permanent Formwork & Composite Decks

• MGO cement permanent formwork (e.g., Magnesium Crystal Henganuo® series) eliminates 100% formwork removal and 60% scaffolding, cutting construction time by 35%.
• Reduces overall project costs by 15% through labor and material savings (adopted in Dongguan Taiwanese Business Building, a LEED Gold pre-certified project).

• 3. Modular & Temporary Buildings

• Detachable and reusable, ideal for prefabricated modular structures like emergency medical facilities, exhibition halls, and worker dormitories.
• Singapore Woodlands General Hospital’s epidemic prevention center used MGO cement panels to quickly build 450 modular units.
• Resists natural disasters (earthquakes, hurricanes) due to its lightweight and high toughness, minimizing collapse risks.

• 4. Fire-Rated & Corrosion-Resistant Components

• Used in prefabricated fire partitions, stairwell enclosures, and exterior cladding for coastal projects (e.g., Hong Kong International Airport Third Runway’s sea-facing walls).

• Passes 4-hour fire resistance tests, meeting strict safety requirements for prefabricated commercial and public buildings (e.g., Macau Off-Island Medical Complex).

  
  

• 

Global Project Success Stories: MGO Cement in Action

International Projects

• Canada: ZS2 Technologies’ 2nd-generation MGO cement panels are used in Krispy Kreme stores and Habitat for Humanity affordable homes, certified by ASTM E136 for non-combustibility.

  
  

• 

• Australia: Prefabricated steel villas use MGO cement floor panels, reducing on-site construction time by 70% while meeting local fire and durability standards.